ARRIS++ Enhanced Menus Package: Sigmac Enhancements

Sigmacs: (Part 2)

New Sigmacs:

The following new sigmac routines were created to provide support for the ARRIS++ menu enhancements. Some of the command names provide links to additional related documentation.

NEW COMMAND CLASS DESCRIPTION

:cj_3d_expini 3D Initialize the R_EXPL overwrite menu

:cj_3d_lsfini 3D Initialize the R_LSCFLY main flyout menu

:cj_3d_lsoset 3D Highlight the R_LSCAPE menu selection box

:cj_3d_lssini 3D Initialize the R_ST_LSCAPE status menu

:cj_3d_ltefly 3D Load the appropriate LIGHT main flyout menu

:cj_3d_matini 3D Initialize the R_MTOVER overwrite menu

:cj_ei_aauth arrisplus Perform ARRISplus module authorization

:cj_ei_ainit arrisplus Perform clean-up when ARRISplus module is loaded

:cj_ei_amesg arrisplus Display an appropriate ARRISplus access failure message

:cj_ei_check arrisplus Validate that ARRISplus is still loaded

:cj_ei_cmplx arrisplus Interface for complex entity FIX & UNGROUP command

:cj_ei_fix arrisplus Clean-up when the ARRISplus module is unloaded

:cj_ei_knfly arrisplus Display the KEYNOTE SPEC main flyout menu

:cj_ei_knmgr arrisplus Display SPECIFICATION MANAGER pop-up menu

:cj_ei_knote arrisplus Initialize the KEYNOTE SPEC overwrite menu

:cj_ei_knpjp arrisplus Manage keynote project report printing

:cj_ei_lyfix arrisplus Display the REPAIR LAYER pop-up menu

:cj_ei_minit arrisplus Initialize the ARRISplus overwrite menu

:cj_ei_ovrwr arrisplus Display the ARRISplus overwrite menu

:cj_ei_patrn arrisplus Display the PATTERN GEOMETRY EDITOR pop-up menu

:cj_ei_rilib arrisplus Display the RI LIBRARY EDITOR pop-up menu

:cj_ei_spdsp arrisplus Display spell checking search mode on text status menus

:cj_ei_spell arrisplus Initiate a spell checking session

:cj_ei_spopt arrisplus Display the SPELL CHECK CONFIG pop-up menu

:cj_ei_sptog arrisplus Toggle the spell checking search mode

:cj_ei_uload arrisplus Unload the ARRISplus plug-in application module.

:cj_ei_versn arrisplus Display current ARRISplus version information

:cj_ei_zones arrisplus Display the ZONE GEOMETRY EDITOR pop-up menu

:cj_bl_brkln break-line Draw a break line between two points (Revised and renamed :cj_brkln)

:cj_ct_name catalog Load current catalog name on _MAIN menu

:cj_ct_pload catalog Front end to system :y_pload sigmac

:cj_ce_favs chad Load Chad Estes' FAVORITE DOCUMENTS menu

:cj_ce_files chad Manage all functions for Chad Estes' DOCUMENTS menus

:cj_ce_fstrt chad Initialize Chad Estes' FAVORITE DOCUMENTS menu

:cj_ce_hist chad Load Chad Estes' RECENT DOCUMENTS menu

:cj_rc_ckcol cloud Update color on the revision cloud status menu

:cj_rc_cloud cloud Manage all functions for revision clouds

:cj_rc_init cloud Initialize the revision cloud status menu

:cj_rc_trap1 cloud Exit trap for the :cj_rc_cloud sigmac

:cj_cm_clsl colormap Support the new CJ_CM_CLSL color select menu with 256 numbered colors

:cj_cm_flipbg colormap Toggle the graphic background between blank and white

:cj_cm_getcol colormap Select a color from the new CJ_CM_CLSL color select menu

:cj_cpen cpen User interface to the C-PEN system

:cj_cp_asgn cpen Assign a color to a pen

:cj_cp_draw cpen Update cpen menu with color

:cj_cp_fill cpen Fill in contents of the C-PEN SETUP menu

:cj_cp_mncl cpen Pick a color from the C-PEN SETUP menu's color bar

:cj_cp_setb cpen Highlight current 'SET' box - if any

:cj_cp_setc cpen Set current pen and color numbers

:cj_cp_setu cpen Display the C-PEN SETUP menu

:cj_cp_styl cpen Manage C-PEN style files

:cj_cu_edini customize Manage editing of ARRIS initialization files

:cj_db_hist database Manage all functions for the RECENT DOCUMENTS menu

:cj_db_user database Manage all functions for the USER DOCUMENTS menu

:cj_db_ustrt database Initialize the USER DOCUMENTS menu

:cj_dk_dstrt desktop Initialization for DESKTOP menu

:cj_dk_pftog desktop Toggle selection mode: PROJECT <-> FILE

:cj_dk_rstrt desktop Initialization for the RECENT DOCUMENTS menu

:cj_dm_trap dimension Exit trap routine for :mn_dmtxed

:cj_dm_trap2 dimension Exit trap routine for :mn_dmtxoff

:cj_ds_layer display Display one or more layers by various methods style

:cj_ds_trap display Exit trap routine for :mn_dxyabs

:cj_dk_atedt edit Manage the ATTRIBUTE button on the EDIT menu

:cj_dk_znedt edit Manage the ZONE button on the EDIT menu

:cj_ed_light edit Update special entity filter indicator light

:cj_sb_trap edit Exit trap routine for :mn_sbscl

:cj_el_cond electrical Interface to :y_elb_cond to set conductor type

:cj_el_drw electrical Interface to :y_elb_drw to set drawing mode

:cj_el_indr electrical Interface to :y_elb_indr to set conduit pairs

:cj_el_init electrical Initialization routine for the ELECTRIC BRANCH menus

:cj_el_menu electrical Display proper values on the ELECTRIC BRANCH menus

:cj_el_swt electrical Interface to :y_elb_swt to set switch mode

:cj_el_wcnt electrical Interface to :y_elb_wcnt to set wire counts

:cj_y_clginit fpln Initialization for the CEILING PLANS menu

:cj_y_cnt fpln Interface to :y_cnt to count walls and openings

:cj_y_dwfinit fpln Initialization for the OPENINGS flyout menu

:cj_y_dwinit fpln Initialization for the openings editing commands

:cj_y_dwselct fpln Select the door or window mode

:cj_y_rptinit fpln Initialize the REPORTS menu

:cj_ga_trap gap Exit trap routine for :gap

:cj_lb_edit label Load the TEXT menu in preparation for label editing

:cj_lc_col layer Controls many functions for the layer mode display colors

:cj_ls_dele layer Delete the specified numbered layer style

:cj_ls_init layer Initialization routine for layer style code

:cj_ls_load layer Load the specified numbered layer style

:cj_ls_name layer Format a layer style file basename

:cj_ls_save layer Save current layers as specified number

:cj_ls_togl layer Toggle back to previous numbered layer style

:cj_ls_wipe layer Delete all numbered ly styles for current sheet/drawing

:cj_ln_stinit line Initialize the ST_LINE status menu

:cj_ma_edit macros Edit the contents of the specified macro file

:cj_ma_mkdir macros Check for/create the "usr:macros.dir" directory

:cj_ma_play macros Execute the commands in the specified macro file

:cj_ma_recfrc macros Record to a macro file - silently overwrite existing files

:cj_ma_record macros Record to a macro file - with overwrite checking

:cj_ma_save macros Save a temporary macro under a more permanent name

:cj_ma_tmpbak macros Backup (rotate) the three temporary macro files

:cj_ml_trap menld Exit trap routine for the :menld menu compiler

:cj_mn_arfix menu Reload the standard ARRIS menu libraries

:cj_mn_btn menu Perform actions for various menu buttons

:cj_mn_cjend menu Cleanup after the ARRIS++ module has been unloaded

:cj_mn_cjfix menu Reload the ARRIS++ master sigmac library

:cj_mn_cjinit menu Initialize the ARRIS++ menus system

:cj_mn_disp menu Redisplay all active menus on the screen

:cj_mn_dtclr menu Clear highlighting from all DESKTOP menu boxes

:cj_mn_load menu Reload all standard menus on the screen

:cj_mn_loadar menu Reload the standard (original) ARRIS menu system

:cj_mn_loadcj menu Load the ARRIS++ Enhanced Menus system

:cj_mn_main menu Initialize the _MAIN menu

:cj_mn_menu menu Manage query/display of MENU PARAMETERS menu

:cj_mn_mnopt menu Load/unload optional mnopt.sm sigmac library

:cj_noop misc Dummy "no op" command

:cj_nyi misc "Not Yet Implemented" message command

:cj_stop misc An enhanced command to replace use of the <ESC> key

:cj_md_cdrag mode Toggle cursor drag mode

:cj_md_hlite mode Toggle the highlight mode

:cj_md_lrdisp mode Display current state of the layer retain mode

:cj_md_refpt mode Toggle display of reference blip

:cj_md_round mode Toggle point rounding mode

:cj_dg_load mouse Load MCI commands from specified file without displaying MCI menu

:cj_mv_panzm move Keyboard-based panning and zooming

:cj_nt_catmen notes Toggle the display of one of the note catalog pop-up menus

:cj_nt_init notes Initialize the notes overwrite and status menus

:cj_nt_init2 notes Initialize the notes overwrite menu only

:cj_nt_param notes Manage all function for the expanded NOTESTAT notes status menu

:cj_nt_prev notes Place the previously selected note

:cj_nt_qsave notes Perform a quick save of the current notes parameters

:cj_op_minit options Initialize the ARRIS++ OPTIONS menu

:cj_op_opts options Manage all functions for the ARRIS++ OPTIONS menu

:cj_ik_scmd overwrite Handle right-click commands for the SETUP button

:cj_xh_bndisp pattern Controls the display of the pattern boundary lines

:cj_xh_bndry pattern Change the pattern boundary retain mode

:cj_xh_colpen pattern Store color & pen values for a style

:cj_xh_disp pattern Display a pattern located at the specified database point

:cj_xh_erase pattern Erase one or more patterns from the drawing

:cj_xh_find pattern Locate an editable pattern near the specified display list point

:cj_xh_libcnt pattern Change RI library or pattern line count

:cj_xh_move pattern Move one or more patterns on the drawing

:cj_xh_mruadd pattern Add specified style name to recent documents list

:cj_xh_namtyp pattern Change RI name or pattern line type

:cj_xh_parchk pattern Check parameters for the current style

:cj_xh_parlod pattern Load variables with current parameters

:cj_xh_parset pattern Set parameters with current variables

:cj_xh_rot pattern Change rotation for a LINE or RI pattern

:cj_xh_scale pattern Change scale for a LINE or RI pattern

:cj_xh_sip pattern Enhanced :sip command to insert points into pattern boundaries

:cj_xh_stinit pattern Initialize the ST_XH pattern status menu

:cj_xh_style pattern Toggle display of the PATTERN CREATE menu

:cj_xh_toggle pattern Toggle the pattern type: LINE/RI/SOLID

:cj_xh_trap pattern Reset the pattern boundary to its initial state

:cj_xh_trap2 pattern Exit trap for the :mn__xhmatch sigmac

:cj_pt_addp point Add (insert) visible point(s)

:cj_pt_copy point Copy visible point(s)

:cj_pt_curf point Toggle normal/full cursor mode with cursor modeling

:cj_pt_ddrp point Display (flash) double-reference point

:cj_pt_dpts point Display temporary 'X' for database points

:cj_pt_draw point Manage cursor drag mode

:cj_pt_dref point Display (flash) reference point

:cj_pt_edfl point Change specified flag value of selected point(s)

:cj_pt_edly point Change the layer of selected point(s)

:cj_pt_edwc point Set the edit window (fence) criteria

:cj_pt_eras point Erase (delete) selected point(s)

:cj_pt_exit point Exit the specified points menu

:cj_pt_fxpt point Set global ARRIS variables to current point values

:cj_pt_glob point Initialize ARRIS++ visible point global variables

:cj_pt_gtro point Prompt for visible point rotation value

:cj_pt_gtsz point Prompt for visible point size value

:cj_pt_inro point Initialize point rotation information on menus

:cj_pt_init point Initialize the POINTS overwrite menu

:cj_pt_inst point Initialize the points status menu

:cj_pt_insu point Initialize the VISIBLE POINT SET-UP menu

:cj_pt_insy point Initialize point symbol information on menus

:cj_pt_insz point Initialize point size information on menus

:cj_pt_invs point Change visible point to invisible

:cj_pt_load point Load the POINTS overwrite menu

:cj_pt_mkpt point Enter a point into the database

:cj_pt_modl point model graphic cursor as a visible point

:cj_pt_move point Move visible point(s) [Front-end to :cj_pt_mvpt]

:cj_pt_mtch point Match visible point parameters

:cj_pt_mvpt point Move visible point(s)

:cj_pt_ndrp point Set new reference point using an intermediate double-reference point

:cj_pt_prev point Display the previous overwrite menu

:cj_pt_pset point Change or match selected visible point parameters

:cj_pt_remk point Remake existing point(s)

:cj_pt_rotn point Set visible point rotation

:cj_pt_show point _Mark points with a temporary 'X'

:cj_pt_size point Set visible point size

:cj_pt_siz2 point Get visible point size from VISIBLE POINT SET-UP menu

:cj_pt_stog point Toggle the points status menu display

:cj_pt_symb point Set the visible point type (number)

:cj_pt_trp1 point Exit handler for :cj_pt_addp

:cj_pt_trp2 point Exit handler for :cj_pt_rotn

:cj_pt_trp3 point Exit handler for :cj_pt_size

:cj_pt_wpda point Delete work points by area

:cj_pt_wpds point Delete individual work points

:cj_pt_xclr point Reset all standard symbol point parameters to default values

:cj_pt_xoff point Toggle standard symbol point offset mode on/off

:cj_pt_xrot point Set standard symbol point rotation

:cj_pt_xsiz point Set standard symbol point size

:cj_pt_xsym point Set standard symbol point table and/or number

:cj_dk_qdocs query Manage documentation functions for the QUERY menu

:cj_qs_load quickstart Load the QUICKSTART application module

:cj_qs_uload quickstart Unload the QUICKSTART application module

:cj_ra_init raster Initialize the raster overwrite menu (ARRIS 8.0 only)

:cj_ra_parm raster Raster parameter setup function (ARRIS 8.0 only)

:cj_ra_place raster Place a raster entity on the drawing (ARRIS 8.0 only)

:cj_ra_raster raster Manage raster entity functions (ARRIS 8.0 only)

:cj_ra_stinit raster Initialize the raster status menu (ARRIS 8.0 only)

:cj_ri_atog ri Toggle automatic reset of RI scale & rotation values when new RI is loaded

:cj_ri_clr1 ri Unhighlight all group 001 boxes on REPITM menu

:cj_ri_init ri Initialize the REPITM menu

:cj_ri_otog ri Toggle the RI placement offset value on/off

:cj_ri_set2 ri Set highlight for ORIGIN OFFSET box on REPITM menu

:cj_ro_init ri offset Initialize the RI OFFSET menu

:cj_st_3doini site Initialize the 3D SITE menu

:cj_tr_trcoff trace Turn sigmac trace mode off

:cj_tr_trcon trace Turn sigmac trace mode on

:cj_tx_txbox text Manage "boxed text" mode

:cj_ik_adjn toolbar Adjust the new user-style name

:cj_ik_asgn toolbar Assign label & cmd to TOOLBAR menu

:cj_ik_catl toolbar Pop-up application submenu's CATALOG menu

:cj_ik_clr1 toolbar Clear assignment from one toolbar box

:cj_ik_clrb toolbar Clear assignments from all toolbar boxes

:cj_ik_cust toolbar Assign custom label & command to TOOLBAR menu

:cj_ik_draw toolbar Display and fill in the TOOLBAR SETUP menu

:cj_ik_exec toolbar Execute a TOOLBAR SETUP menu box command

:cj_ik_fill toolbar Fill in the TOOLBAR menu label text

:cj_ik_help toolbar Handle assignments from :mn_mnhelp

:cj_ik_ikex toolbar Execute an TOOLBAR menu box command

:cj_ik_ikld toolbar Load the appropriate TOOLBAR menu library

:cj_ik_ikul toolbar Unload the current TOOLBAR menu library

:cj_ik_init toolbar Initialize/display the TOOLBAR SETUP menu

:cj_ik_labl toolbar Get a toolbar box label from user

:cj_ik_lddf toolbar Load the default TOOLBAR menu styles

:cj_ik_lrow toolbar Load whole row of commands onto TOOLBAR menu

:cj_ik_rilb toolbar Load/Unload the ikon RI library

:cj_ik_rils toolbar Search for RI library for a specific RI

:cj_ik_rset toolbar Do internal TOOLBAR SETUP menu reset work

:cj_ik_scmd toolbar Handle right-click commands for the SETUP button

:cj_ik_scrl toolbar Manage CJ_IKSETUP menu scrolling and paging

:cj_ik_slct toolbar Pop-up application submenu's SELECT menu

:cj_ik_strt toolbar Initialize the TOOLBAR menu

:cj_ik_styl toolbar Manage toolbar style files

:cj_ik_tbar toolbar Manage the TOOLBAR BUTTON CUSTOMIZATION menu

:cj_ik_tbcs toolbar Split the toolbar command string into parts

:cj_ik_tbin toolbar Initialize the TOOLBAR BUTTON CUSTOMIZATION menu

:cj_ik_togl toolbar Toggle specified parameter ON/OFF

:cj_ik_trap toolbar Exit trap routine to reset toolbar mode

:cj_ik_utog toolbar Toggle between two active toolbar styles

:cj_ik_zdsp toolbar Display current Z-height on the toolbar menu

:cj_ik_zhgt toolbar Set plan-view work plane at Z-height

:cj_ik_ztog toolbar Toggle Z-height to last used value

:cj_ut_lcase utility Convert string in stored scj_ut_string to all lowercase

:cj_ut_scase utility Swap case of all characters in string stored in scj_ut_string

:cj_ut_ucase utility Convert string stored in scj_ut_string to all uppercase

:cj_vers version Display the current ARRIS++ version

:cj_vp_areazm vport Zoom to screen region with viewport outline

:cj_vp_czw vport 2-point windowed zoom with viewport outline

:cj_vp_pan2 vport 2-point panning with viewport outline

:cj_vp_qview vport Quietly display viewport outline

:cj_vp_rview vport Display viewport outline

:cj_vp_togl vport Toggle in/out of a viewport with auto-save enabled

:cj_vp_winda vport Display all windows with viewport outline

:cj_vp_windpe vport Display all windows with viewport outline

:cj_vp_zoomw vport 2-point windowed zoom with viewport outline

:cj_vw_dele view Delete the specified numbered view

:cj_vw_init view Initialize various global variables

:cj_vw_name view Format a numbered view filename

:cj_vw_rotn view Set view to specified Z-axis rot. angle

:cj_vw_save view Save current view as specified number

:cj_vw_toga view Toggle the current view angle on/off

:cj_vw_togv view Toggle back to previous numbered view

:cj_vw_view view Restore the specified numbered view

:cj_vw_wipe view Delete all numbered views for current DB

:cj_vw_zoom view Zoom window then save view as specified number

:cj_ww_init winport Initialize the winport variables

:cj_ww_load winport Load the specified numbered winport style

:cj_ww_save winport Save the current configuration as a numbered winport style

:cj_wa_bisect work ang Set work angle by bisecting specified angle

:cj_wa_trap1 work ang Exit handler for the :cj_wa_bisect sigmac

NEW COMMAND	CLASS	DESCRIPTION
`:cj_3d_expini`	3D	Initialize the R_EXPL overwrite menu
`:cj_3d_lsfini`	3D	Initialize the R_LSCFLY main flyout menu
`:cj_3d_lsoset`	3D	Highlight the R_LSCAPE menu selection box
`:cj_3d_lssini`	3D	Initialize the R_ST_LSCAPE status menu
`:cj_3d_ltefly`	3D	Load the appropriate LIGHT main flyout menu
`:cj_3d_matini`	3D	Initialize the R_MTOVER overwrite menu

`:cj_ei_aauth`	arrisplus	Perform ARRISplus module authorization
`:cj_ei_ainit`	arrisplus	Perform clean-up when ARRISplus module is loaded
`:cj_ei_amesg`	arrisplus	Display an appropriate ARRISplus access failure message
`:cj_ei_check`	arrisplus	Validate that ARRISplus is still loaded
`:cj_ei_cmplx`	arrisplus	Interface for complex entity FIX & UNGROUP command
`:cj_ei_fix`	arrisplus	Clean-up when the ARRISplus module is unloaded
`:cj_ei_knfly`	arrisplus	Display the KEYNOTE SPEC main flyout menu
`:cj_ei_knmgr`	arrisplus	Display SPECIFICATION MANAGER pop-up menu
`:cj_ei_knote`	arrisplus	Initialize the KEYNOTE SPEC overwrite menu
`:cj_ei_knpjp`	arrisplus	Manage keynote project report printing
`:cj_ei_lyfix`	arrisplus	Display the REPAIR LAYER pop-up menu
`:cj_ei_minit`	arrisplus	Initialize the ARRISplus overwrite menu
`:cj_ei_ovrwr`	arrisplus	Display the ARRISplus overwrite menu
`:cj_ei_patrn`	arrisplus	Display the PATTERN GEOMETRY EDITOR pop-up menu
`:cj_ei_rilib`	arrisplus	Display the RI LIBRARY EDITOR pop-up menu
`:cj_ei_spdsp`	arrisplus	Display spell checking search mode on text status menus
`:cj_ei_spell`	arrisplus	Initiate a spell checking session
`:cj_ei_spopt`	arrisplus	Display the SPELL CHECK CONFIG pop-up menu
`:cj_ei_sptog`	arrisplus	Toggle the spell checking search mode
`:cj_ei_uload`	arrisplus	Unload the ARRISplus plug-in application module.
`:cj_ei_versn`	arrisplus	Display current ARRISplus version information
`:cj_ei_zones`	arrisplus	Display the ZONE GEOMETRY EDITOR pop-up menu

`:cj_bl_brkln`	break-line	Draw a break line between two points (Revised and renamed `:cj_brkln`)

`:cj_ct_name`	catalog	Load current catalog name on _MAIN menu
`:cj_ct_pload`	catalog	Front end to system `:y_pload` sigmac

`:cj_ce_favs`	chad	Load Chad Estes' FAVORITE DOCUMENTS menu
`:cj_ce_files`	chad	Manage all functions for Chad Estes' DOCUMENTS menus
`:cj_ce_fstrt`	chad	Initialize Chad Estes' FAVORITE DOCUMENTS menu
`:cj_ce_hist`	chad	Load Chad Estes' RECENT DOCUMENTS menu

`:cj_rc_ckcol`	cloud	Update color on the revision cloud status menu
`:cj_rc_cloud`	cloud	Manage all functions for revision clouds
`:cj_rc_init`	cloud	Initialize the revision cloud status menu
`:cj_rc_trap1`	cloud	Exit trap for the :cj_rc_cloud sigmac

`:cj_cm_clsl`	colormap	Support the new CJ_CM_CLSL color select menu with 256 numbered colors
`:cj_cm_flipbg`	colormap	Toggle the graphic background between blank and white
`:cj_cm_getcol`	colormap	Select a color from the new CJ_CM_CLSL color select menu

`:cj_cpen`	cpen	User interface to the C-PEN system
`:cj_cp_asgn`	cpen	Assign a color to a pen
`:cj_cp_draw`	cpen	Update cpen menu with color
`:cj_cp_fill`	cpen	Fill in contents of the C-PEN SETUP menu
`:cj_cp_mncl`	cpen	Pick a color from the C-PEN SETUP menu's color bar
`:cj_cp_setb`	cpen	Highlight current 'SET' box - if any
`:cj_cp_setc`	cpen	Set current pen and color numbers
`:cj_cp_setu`	cpen	Display the C-PEN SETUP menu
`:cj_cp_styl`	cpen	Manage C-PEN style files

`:cj_cu_edini`	customize	Manage editing of ARRIS initialization files

`:cj_db_hist`	database	Manage all functions for the RECENT DOCUMENTS menu
`:cj_db_user`	database	Manage all functions for the USER DOCUMENTS menu
`:cj_db_ustrt`	database	Initialize the USER DOCUMENTS menu

`:cj_dk_dstrt`	desktop	Initialization for DESKTOP menu
`:cj_dk_pftog`	desktop	Toggle selection mode: PROJECT <-> FILE
`:cj_dk_rstrt`	desktop	Initialization for the RECENT DOCUMENTS menu

`:cj_dm_trap`	dimension	Exit trap routine for `:mn_dmtxed`
`:cj_dm_trap2`	dimension	Exit trap routine for `:mn_dmtxoff`

`:cj_ds_layer`	display	Display one or more layers by various methods style
`:cj_ds_trap`	display	Exit trap routine for `:mn_dxyabs`

`:cj_dk_atedt`	edit	Manage the ATTRIBUTE button on the EDIT menu
`:cj_dk_znedt`	edit	Manage the ZONE button on the EDIT menu
`:cj_ed_light`	edit	Update special entity filter indicator light
`:cj_sb_trap`	edit	Exit trap routine for `:mn_sbscl`

`:cj_el_cond`	electrical	Interface to `:y_elb_cond` to set conductor type
`:cj_el_drw`	electrical	Interface to `:y_elb_drw` to set drawing mode
`:cj_el_indr`	electrical	Interface to `:y_elb_indr` to set conduit pairs
`:cj_el_init`	electrical	Initialization routine for the ELECTRIC BRANCH menus
`:cj_el_menu`	electrical	Display proper values on the ELECTRIC BRANCH menus
`:cj_el_swt`	electrical	Interface to `:y_elb_swt` to set switch mode
`:cj_el_wcnt`	electrical	Interface to `:y_elb_wcnt` to set wire counts

`:cj_y_clginit`	fpln	Initialization for the CEILING PLANS menu
`:cj_y_cnt`	fpln	Interface to `:y_cnt` to count walls and openings
`:cj_y_dwfinit`	fpln	Initialization for the OPENINGS flyout menu
`:cj_y_dwinit`	fpln	Initialization for the openings editing commands
`:cj_y_dwselct`	fpln	Select the door or window mode
`:cj_y_rptinit`	fpln	Initialize the REPORTS menu

`:cj_ga_trap`	gap	Exit trap routine for `:gap`

`:cj_lb_edit`	label	Load the TEXT menu in preparation for label editing

`:cj_lc_col`	layer	Controls many functions for the layer mode display colors
`:cj_ls_dele`	layer	Delete the specified numbered layer style
`:cj_ls_init`	layer	Initialization routine for layer style code
`:cj_ls_load`	layer	Load the specified numbered layer style
`:cj_ls_name`	layer	Format a layer style file basename
`:cj_ls_save`	layer	Save current layers as specified number
`:cj_ls_togl`	layer	Toggle back to previous numbered layer style
`:cj_ls_wipe`	layer	Delete all numbered ly styles for current sheet/drawing

`:cj_ln_stinit`	line	Initialize the ST_LINE status menu

`:cj_ma_edit`	macros	Edit the contents of the specified macro file
`:cj_ma_mkdir`	macros	Check for/create the "usr:macros.dir" directory
`:cj_ma_play`	macros	Execute the commands in the specified macro file
`:cj_ma_recfrc`	macros	Record to a macro file - silently overwrite existing files
`:cj_ma_record`	macros	Record to a macro file - with overwrite checking
`:cj_ma_save`	macros	Save a temporary macro under a more permanent name
`:cj_ma_tmpbak`	macros	Backup (rotate) the three temporary macro files

`:cj_ml_trap`	menld	Exit trap routine for the `:menld` menu compiler

`:cj_mn_arfix`	menu	Reload the standard ARRIS menu libraries
`:cj_mn_btn`	menu	Perform actions for various menu buttons
`:cj_mn_cjend`	menu	Cleanup after the ARRIS++ module has been unloaded
`:cj_mn_cjfix`	menu	Reload the ARRIS++ master sigmac library
`:cj_mn_cjinit`	menu	Initialize the ARRIS++ menus system
`:cj_mn_disp`	menu	Redisplay all active menus on the screen
`:cj_mn_dtclr`	menu	Clear highlighting from all DESKTOP menu boxes
`:cj_mn_load`	menu	Reload all standard menus on the screen
`:cj_mn_loadar`	menu	Reload the standard (original) ARRIS menu system
`:cj_mn_loadcj`	menu	Load the ARRIS++ Enhanced Menus system
`:cj_mn_main`	menu	Initialize the _MAIN menu
`:cj_mn_menu`	menu	Manage query/display of MENU PARAMETERS menu
`:cj_mn_mnopt`	menu	Load/unload optional mnopt.sm sigmac library

`:cj_noop`	misc	Dummy "no op" command
`:cj_nyi`	misc	"Not Yet Implemented" message command
`:cj_stop`	misc	An enhanced command to replace use of the <ESC> key

`:cj_md_cdrag`	mode	Toggle cursor drag mode
`:cj_md_hlite`	mode	Toggle the highlight mode
`:cj_md_lrdisp`	mode	Display current state of the layer retain mode
`:cj_md_refpt`	mode	Toggle display of reference blip
`:cj_md_round`	mode	Toggle point rounding mode

`:cj_dg_load`	mouse	Load MCI commands from specified file without displaying MCI menu

`:cj_mv_panzm`	move	Keyboard-based panning and zooming

`:cj_nt_catmen`	notes	Toggle the display of one of the note catalog pop-up menus
`:cj_nt_init`	notes	Initialize the notes overwrite and status menus
`:cj_nt_init2`	notes	Initialize the notes overwrite menu only
`:cj_nt_param`	notes	Manage all function for the expanded NOTESTAT notes status menu
`:cj_nt_prev`	notes	Place the previously selected note
`:cj_nt_qsave`	notes	Perform a quick save of the current notes parameters

`:cj_op_minit`	options	Initialize the ARRIS++ OPTIONS menu
`:cj_op_opts`	options	Manage all functions for the ARRIS++ OPTIONS menu

`:cj_ik_scmd`	overwrite	Handle right-click commands for the SETUP button

`:cj_xh_bndisp`	pattern	Controls the display of the pattern boundary lines
`:cj_xh_bndry`	pattern	Change the pattern boundary retain mode
`:cj_xh_colpen`	pattern	Store color & pen values for a style
`:cj_xh_disp`	pattern	Display a pattern located at the specified database point
`:cj_xh_erase`	pattern	Erase one or more patterns from the drawing
`:cj_xh_find`	pattern	Locate an editable pattern near the specified display list point
`:cj_xh_libcnt`	pattern	Change RI library or pattern line count
`:cj_xh_move`	pattern	Move one or more patterns on the drawing
`:cj_xh_mruadd`	pattern	Add specified style name to recent documents list
`:cj_xh_namtyp`	pattern	Change RI name or pattern line type
`:cj_xh_parchk`	pattern	Check parameters for the current style
`:cj_xh_parlod`	pattern	Load variables with current parameters
`:cj_xh_parset`	pattern	Set parameters with current variables
`:cj_xh_rot`	pattern	Change rotation for a LINE or RI pattern
`:cj_xh_scale`	pattern	Change scale for a LINE or RI pattern
`:cj_xh_sip`	pattern	Enhanced `:sip` command to insert points into pattern boundaries
`:cj_xh_stinit`	pattern	Initialize the ST_XH pattern status menu
`:cj_xh_style`	pattern	Toggle display of the PATTERN CREATE menu
`:cj_xh_toggle`	pattern	Toggle the pattern type: LINE/RI/SOLID
`:cj_xh_trap`	pattern	Reset the pattern boundary to its initial state
`:cj_xh_trap2`	pattern	Exit trap for the `:mn__xhmatch` sigmac

`:cj_pt_addp`	point	Add (insert) visible point(s)
`:cj_pt_copy`	point	Copy visible point(s)
`:cj_pt_curf`	point	Toggle normal/full cursor mode with cursor modeling
`:cj_pt_ddrp`	point	Display (flash) double-reference point
`:cj_pt_dpts`	point	Display temporary 'X' for database points
`:cj_pt_draw`	point	Manage cursor drag mode
`:cj_pt_dref`	point	Display (flash) reference point
`:cj_pt_edfl`	point	Change specified flag value of selected point(s)
`:cj_pt_edly`	point	Change the layer of selected point(s)
`:cj_pt_edwc`	point	Set the edit window (fence) criteria
`:cj_pt_eras`	point	Erase (delete) selected point(s)
`:cj_pt_exit`	point	Exit the specified points menu
`:cj_pt_fxpt`	point	Set global ARRIS variables to current point values
`:cj_pt_glob`	point	Initialize ARRIS++ visible point global variables
`:cj_pt_gtro`	point	Prompt for visible point rotation value
`:cj_pt_gtsz`	point	Prompt for visible point size value
`:cj_pt_inro`	point	Initialize point rotation information on menus
`:cj_pt_init`	point	Initialize the POINTS overwrite menu
`:cj_pt_inst`	point	Initialize the points status menu
`:cj_pt_insu`	point	Initialize the VISIBLE POINT SET-UP menu
`:cj_pt_insy`	point	Initialize point symbol information on menus
`:cj_pt_insz`	point	Initialize point size information on menus
`:cj_pt_invs`	point	Change visible point to invisible
`:cj_pt_load`	point	Load the POINTS overwrite menu
`:cj_pt_mkpt`	point	Enter a point into the database
`:cj_pt_modl`	point	model graphic cursor as a visible point
`:cj_pt_move`	point	Move visible point(s) [Front-end to :cj_pt_mvpt]
`:cj_pt_mtch`	point	Match visible point parameters
`:cj_pt_mvpt`	point	Move visible point(s)
`:cj_pt_ndrp`	point	Set new reference point using an intermediate double-reference point
`:cj_pt_prev`	point	Display the previous overwrite menu
`:cj_pt_pset`	point	Change or match selected visible point parameters
`:cj_pt_remk`	point	Remake existing point(s)
`:cj_pt_rotn`	point	Set visible point rotation
`:cj_pt_show`	point	_Mark points with a temporary 'X'
`:cj_pt_size`	point	Set visible point size
`:cj_pt_siz2`	point	Get visible point size from VISIBLE POINT SET-UP menu
`:cj_pt_stog`	point	Toggle the points status menu display
`:cj_pt_symb`	point	Set the visible point type (number)
`:cj_pt_trp1`	point	Exit handler for :cj_pt_addp
`:cj_pt_trp2`	point	Exit handler for :cj_pt_rotn
`:cj_pt_trp3`	point	Exit handler for :cj_pt_size
`:cj_pt_wpda`	point	Delete work points by area
`:cj_pt_wpds`	point	Delete individual work points
`:cj_pt_xclr`	point	Reset all standard symbol point parameters to default values
`:cj_pt_xoff`	point	Toggle standard symbol point offset mode on/off
`:cj_pt_xrot`	point	Set standard symbol point rotation
`:cj_pt_xsiz`	point	Set standard symbol point size
`:cj_pt_xsym`	point	Set standard symbol point table and/or number

`:cj_dk_qdocs`	query	Manage documentation functions for the QUERY menu

`:cj_qs_load`	quickstart	Load the QUICKSTART application module
`:cj_qs_uload`	quickstart	Unload the QUICKSTART application module

`:cj_ra_init`	raster	Initialize the raster overwrite menu (ARRIS 8.0 only)
`:cj_ra_parm`	raster	Raster parameter setup function (ARRIS 8.0 only)
`:cj_ra_place`	raster	Place a raster entity on the drawing (ARRIS 8.0 only)
`:cj_ra_raster`	raster	Manage raster entity functions (ARRIS 8.0 only)
`:cj_ra_stinit`	raster	Initialize the raster status menu (ARRIS 8.0 only)

`:cj_ri_atog`	ri	Toggle automatic reset of RI scale & rotation values when new RI is loaded
`:cj_ri_clr1`	ri	Unhighlight all group 001 boxes on REPITM menu
`:cj_ri_init`	ri	Initialize the REPITM menu
`:cj_ri_otog`	ri	Toggle the RI placement offset value on/off
`:cj_ri_set2`	ri	Set highlight for ORIGIN OFFSET box on REPITM menu

`:cj_ro_init`	ri offset	Initialize the RI OFFSET menu

`:cj_st_3doini`	site	Initialize the 3D SITE menu

`:cj_tr_trcoff`	trace	Turn sigmac trace mode off
`:cj_tr_trcon`	trace	Turn sigmac trace mode on

`:cj_tx_txbox`	text	Manage "boxed text" mode

`:cj_ik_adjn`	toolbar	Adjust the new user-style name
`:cj_ik_asgn`	toolbar	Assign label & cmd to TOOLBAR menu
`:cj_ik_catl`	toolbar	Pop-up application submenu's CATALOG menu
`:cj_ik_clr1`	toolbar	Clear assignment from one toolbar box
`:cj_ik_clrb`	toolbar	Clear assignments from all toolbar boxes
`:cj_ik_cust`	toolbar	Assign custom label & command to TOOLBAR menu
`:cj_ik_draw`	toolbar	Display and fill in the TOOLBAR SETUP menu
`:cj_ik_exec`	toolbar	Execute a TOOLBAR SETUP menu box command
`:cj_ik_fill`	toolbar	Fill in the TOOLBAR menu label text
`:cj_ik_help`	toolbar	Handle assignments from `:mn_mnhelp`
`:cj_ik_ikex`	toolbar	Execute an TOOLBAR menu box command
`:cj_ik_ikld`	toolbar	Load the appropriate TOOLBAR menu library
`:cj_ik_ikul`	toolbar	Unload the current TOOLBAR menu library
`:cj_ik_init`	toolbar	Initialize/display the TOOLBAR SETUP menu
`:cj_ik_labl`	toolbar	Get a toolbar box label from user
`:cj_ik_lddf`	toolbar	Load the default TOOLBAR menu styles
`:cj_ik_lrow`	toolbar	Load whole row of commands onto TOOLBAR menu
`:cj_ik_rilb`	toolbar	Load/Unload the ikon RI library
`:cj_ik_rils`	toolbar	Search for RI library for a specific RI
`:cj_ik_rset`	toolbar	Do internal TOOLBAR SETUP menu reset work
`:cj_ik_scmd`	toolbar	Handle right-click commands for the SETUP button
`:cj_ik_scrl`	toolbar	Manage CJ_IKSETUP menu scrolling and paging
`:cj_ik_slct`	toolbar	Pop-up application submenu's SELECT menu
`:cj_ik_strt`	toolbar	Initialize the TOOLBAR menu
`:cj_ik_styl`	toolbar	Manage toolbar style files
`:cj_ik_tbar`	toolbar	Manage the TOOLBAR BUTTON CUSTOMIZATION menu
`:cj_ik_tbcs`	toolbar	Split the toolbar command string into parts
`:cj_ik_tbin`	toolbar	Initialize the TOOLBAR BUTTON CUSTOMIZATION menu
`:cj_ik_togl`	toolbar	Toggle specified parameter ON/OFF
`:cj_ik_trap`	toolbar	Exit trap routine to reset toolbar mode
`:cj_ik_utog`	toolbar	Toggle between two active toolbar styles
`:cj_ik_zdsp`	toolbar	Display current Z-height on the toolbar menu
`:cj_ik_zhgt`	toolbar	Set plan-view work plane at Z-height
`:cj_ik_ztog`	toolbar	Toggle Z-height to last used value

`:cj_ut_lcase`	utility	Convert string in stored scj_ut_string to all lowercase
`:cj_ut_scase`	utility	Swap case of all characters in string stored in scj_ut_string
`:cj_ut_ucase`	utility	Convert string stored in scj_ut_string to all uppercase

`:cj_vers`	version	Display the current ARRIS++ version

`:cj_vp_areazm`	vport	Zoom to screen region with viewport outline
`:cj_vp_czw`	vport	2-point windowed zoom with viewport outline
`:cj_vp_pan2`	vport	2-point panning with viewport outline
`:cj_vp_qview`	vport	Quietly display viewport outline
`:cj_vp_rview`	vport	Display viewport outline
`:cj_vp_togl`	vport	Toggle in/out of a viewport with auto-save enabled
`:cj_vp_winda`	vport	Display all windows with viewport outline
`:cj_vp_windpe`	vport	Display all windows with viewport outline
`:cj_vp_zoomw`	vport	2-point windowed zoom with viewport outline

`:cj_vw_dele`	view	Delete the specified numbered view
`:cj_vw_init`	view	Initialize various global variables
`:cj_vw_name`	view	Format a numbered view filename
`:cj_vw_rotn`	view	Set view to specified Z-axis rot. angle
`:cj_vw_save`	view	Save current view as specified number
`:cj_vw_toga`	view	Toggle the current view angle on/off
`:cj_vw_togv`	view	Toggle back to previous numbered view
`:cj_vw_view`	view	Restore the specified numbered view
`:cj_vw_wipe`	view	Delete all numbered views for current DB
`:cj_vw_zoom`	view	Zoom window then save view as specified number

`:cj_ww_init`	winport	Initialize the winport variables
`:cj_ww_load`	winport	Load the specified numbered winport style
`:cj_ww_save`	winport	Save the current configuration as a numbered winport style

`:cj_wa_bisect`	work ang	Set work angle by bisecting specified angle
`:cj_wa_trap1`	work ang	Exit handler for the `:cj_wa_bisect` sigmac

Sigmacs: (Part 2)

New Sigmacs:

See Also: